Home / Services / Waterproofing & Insulation

Waterproofing & Insulation in Saudi Arabia, dry, cool and protected

Anas Al Khaleej Company waterproofs roofs, bathrooms, basements, tanks and foundations, and adds thermal insulation that keeps buildings cooler and lowers the load on air conditioning.

Roof waterproofingWet areas & tanksBelow-grade protectionThermal insulation
Torch-applied bitumen roof waterproofing membrane on a villa roof in Saudi Arabia
Each layer installed and tested before the next
Roof to basementEvery area of the building
Flood testedWater test before covering
Heat reductionInsulation for Saudi summers
Leak repairInspection and targeted repair
Kingdom-wideRiyadh, Jeddah, Dammam and more
Why leaks happen

Most leaks come from details, not from rain

Rain in Saudi Arabia is not frequent, but when it comes it is heavy. Roofs without proper falls, drains and upstands hold water and leak through cracks and joints.

Bathrooms, kitchens and water tanks cause even more damage because they leak every day, often hidden until tiles lift or ceilings stain.

We waterproof with the right system for each area, detail the corners, drains and joints carefully, and flood test before anything is covered.

Typical roof waterproofing build-up
Protection & finishTiles, screed or coating
Thermal insulationBoards to reduce heat gain
Waterproof membraneBitumen, PU or cementitious
PrimerBonds the membrane to the slab
Screed to fallsSlopes water to the drains
Each layer installed and tested before the next
Roofs & terraces

Membranes with insulation and protection for exposed roofs.

Flood tested before tiling
Bathrooms & kitchens

Liquid or cementitious membranes under tiles.

Corners and drains reinforced
Basements & foundations

Below-grade membranes against ground moisture.

Applied before backfilling
Water tanks & pools

Cementitious or approved coatings for water retention.

Tested full before use
Our scope

Waterproofing and insulation services

New-build systems and leak repairs for residential, commercial and industrial buildings.

Roof waterproofing

Bitumen, PU or cementitious membranes with proper falls and drain details.

Roof thermal insulation

Insulation boards that reduce heat gain through the roof.

Bathroom & kitchen waterproofing

Membranes under tiles for showers, floors and wet walls.

Basement & foundation waterproofing

Below-grade protection for foundations, retaining walls and basements.

Water tank waterproofing

Underground and roof tanks lined and sealed.

Swimming pools

Pool shell waterproofing before tiling.

Leak detection & repair

Finding the source of leaks and repairing only what is needed.

Systems

Waterproofing systems we use, and where

We choose the system for each area. Product and thickness are confirmed in your written quote.

SystemBest forTypical applicationKey benefit
Bitumen membraneRoofs, foundations, basementsTorch-applied sheetsProven, tough and durable
Polyurethane (PU) liquidRoofs, terraces, balconiesSeamless liquid coatNo joints, follows complex shapes
Cementitious coatingBathrooms, tanks, basementsBrush or trowel appliedBonds to concrete, good for wet areas
Acrylic / elastomericWalls, parapets, small roofsRoller appliedFlexible, bridges fine cracks
Insulation boardsRoofs and wallsLaid over membraneReduces heat gain and cooling cost
How it works

Our waterproofing process

  1. Inspect & diagnose

    We find the leak source or review the new-build details.

  2. Surface preparation

    Cleaning, repairs, screed to falls and priming.

  3. Detail work

    Drains, corners, upstands and joints reinforced first.

  4. Membrane & insulation

    Main system applied, then insulation where specified.

  5. Flood test & protect

    Water test, then protection layer or tiles.

Pricing

How much does waterproofing cost?

Waterproofing is usually priced per square metre, based on the system, area and condition. Leak repairs are priced after inspection.

  • Area in m²Roof, bathroom, basement or tank area.
  • System chosenBitumen, PU, cementitious or acrylic.
  • With or without insulationAdding thermal insulation and protection layers.
  • Existing conditionRemoving old tiles or failed layers adds work.
  • Details and accessMany drains, pipes and upstands take more time.

Leak inspections and site visits are free. Every quote lists system, area and thickness.

Projects

Where we waterproof and insulate

Serving Riyadh, Jeddah, Dammam, Khobar and other cities, subject to scope and site.

Villa roofs & terraces

Waterproofing with insulation and tiles.

Bathrooms & kitchens

Wet-area waterproofing during renovation.

Basements

Below-grade protection for new buildings.

Water tanks

Underground and roof tanks lined and sealed.

Commercial roofs

Large roofs for offices, malls and schools.

Warehouses

Roof and floor protection for industrial buildings.

Why us

Why choose Anas Al Khaleej for waterproofing

Right system for each area

Not one product for every job.

Details done first

Drains, corners and joints reinforced before the main coat.

Flood tested

We test with water before tiles or screed cover the work.

Insulation included

Cooler roofs and lower AC load in Saudi summers.

Honest leak repair

We find the source and fix what is needed.

Written warranty

Warranty terms stated in your quotation.

FAQ

Waterproofing and insulation questions

How do I know if my roof needs waterproofing?

Stains on ceilings, peeling paint, damp smells, cracked roof screed or water standing on the roof after rain are common signs. We can inspect and confirm.

Which waterproofing is best for roofs in Saudi Arabia?

Bitumen membranes and polyurethane liquid systems are both common for roofs. The choice depends on the roof shape, traffic, budget and whether insulation is added.

Does roof insulation really reduce heat?

Yes. Insulation reduces the heat that passes through the roof into the rooms below, which helps the air conditioning work less.

Can you fix a bathroom leak without removing all tiles?

Sometimes. It depends on the leak source. We inspect first and remove only what is needed to repair the waterproofing properly.

What is a flood test?

After waterproofing, we hold water on the area for a set time to check for leaks before tiles or screed cover the membrane.

Do you waterproof water tanks?

Yes. We waterproof underground and roof tanks with suitable coatings for water retention.

How long does waterproofing last?

A properly installed and protected system lasts many years. Life depends on the system, exposure and whether it is protected from sun and traffic.

How do we start?

Send photos of the leak or your roof on WhatsApp. We arrange a free inspection and send a written quote.

Free leak inspection

Leaking roof, bathroom or tank?

Send photos or your location. Our team will contact you within 24 hours to arrange an inspection and quote.