Plastering Works in Saudi Arabia, straight walls, ready for paint
Anas Al Khaleej Company provides plastering works in Saudi Arabia: cement and gypsum plaster for interior walls, ceilings and external facades for villas, buildings and commercial projects, by hand or by machine, with level, smooth surfaces ready for paint or finishes.
Good plaster depends on preparation and curing
In Saudi heat, fresh cement plaster loses water too fast. If it is not wetted and cured, it shrinks and cracks, and the cracks show through the paint later.
Cracks also start where block walls meet concrete columns and beams, and where plaster is laid too thick in one coat or over a dusty surface.
We clean and wet the wall, fix mesh over joints, set level guides, build up thick plaster in layers and cure it properly, so the surface stays sound for paint.
Cement or gypsum plaster for rooms, halls and corridors.
Smooth finish ready for putty and paintGypsum or cement plaster on concrete slabs.
Levelled for an even look under lightSand-cement render for villas and buildings.
Cured to resist sun and heat cracksCement plaster that holds up to moisture.
Ready for waterproofing and tilesPlastering services we provide
New-build plastering and repairs for homes, buildings and commercial projects.
Internal cement plaster
Sand-cement plaster on block and concrete walls, levelled to guides.
External render
Facade and boundary wall plaster, smooth or textured, ready for paint.
Gypsum plaster
Fast, very smooth plaster for dry interior walls and ceilings.
Machine plastering
Spray machines for large areas: faster work and an even thickness.
Corner beads & edges
Straight, protected corners, window reveals and door openings.
Mesh & crack control
Fibre or steel mesh over joints, chases and between materials.
Plaster repairs
Removing hollow or damaged plaster and patching to match.
Skim coat & putty
Fine finishing coats for a paint-ready surface.
Faster plastering for large projects
For villas, buildings and commercial projects we use plaster spraying machines. The machine mixes and sprays the plaster evenly onto the wall, then our team levels it with a straightedge and finishes it by hand.
- Faster on large areasCovers big walls and floors in less time than hand mixing.
- Even thicknessA steady spray gives a consistent layer across the wall.
- Consistent mixThe machine mixes every batch the same way.
- Hand finishedLevelled with guides and straightedge, then trowelled smooth.
Plaster types we use, and where
We choose the plaster for each area. Material and thickness are confirmed in your written quote.
| Plaster type | Best for | Typical application | Key benefit |
|---|---|---|---|
| Sand-cement plaster | Interior walls, wet areas | Hand or machine applied in one or two coats | Strong and moisture tolerant |
| External cement render | Facades, boundary walls | Dash coat plus render coat | Durable in sun and heat |
| Gypsum plaster | Dry interior walls, ceilings | Single coat, trowelled smooth | Very smooth, quick to paint |
| Machine-sprayed plaster | Large villas, buildings, fast-track projects | Sprayed by plaster machine, levelled with straightedge | Faster, even thickness, consistent mix |
| Skim coat / putty | Final finish before paint | Thin coats, sanded | Paint-ready surface |
Our plastering process
Site visit & quote
We check the walls, measure the area and give a written quote.
Surface preparation
Cleaning, wetting, mesh at joints and a bonding coat.
Guides & levels
Level guides and corner beads set before plastering.
Plastering
Plaster applied by hand or machine, straightened and finished.
Curing & handover
Wet curing, level check and a surface ready for paint.
How much does plastering cost?
Plastering is usually priced per square metre, based on the plaster type, thickness and site conditions. Repairs are priced after a site visit.
- Area in m²Walls, ceilings and facade area.
- Plaster type & methodCement or gypsum, by hand or by machine.
- Thickness & wall conditionUneven walls need more material and coats.
- Height & accessFacades and high ceilings need scaffolding.
- Finish requiredPlaster only, or plaster with putty and paint.
Site visits are free. Every quote is written, with the plaster type and scope listed clearly.
Where we plaster
Serving Riyadh, Jeddah, Dammam, Khobar and other cities, subject to scope and site.
New villas
Full internal and external plastering.
Residential buildings
Apartments, stairwells and facades.
Commercial projects
Offices, shops and showrooms.
Schools & public buildings
Large areas with consistent finish.
Boundary walls
External render ready for paint.
Renovations
Plaster repairs and re-plastering.
Why choose Anas Al Khaleej for plastering
Level and straight
Guides and checks on every wall.
Fewer cracks
Mesh at joints and proper curing.
Hand or machine
The right plaster and method for each job.
Paint under one roof
We are painters too, so the finish is ready.
Clear written quotes
Scope, material and area listed.
Clean, tidy sites
Protection and clean-up each day.
Plastering questions
How long does plaster take to dry before painting?
Cement plaster usually needs around 2 to 4 weeks to cure and dry before paint, depending on thickness, season and ventilation. Gypsum plaster dries much faster, often within a few days. We advise on timing for your site.
Cement plaster or gypsum plaster, which is better?
Cement plaster is stronger and suits external walls, wet areas and surfaces that may get damp. Gypsum plaster gives a very smooth finish quickly and suits dry interior walls and ceilings.
Why does plaster crack, and how do you prevent it?
Most cracks come from poor curing in hot weather, plaster applied too thick in one coat, or movement where block meets concrete. We wet the wall before plastering, fix mesh at joints, build up thick plaster in layers and cure it properly.
Do you plaster external walls and boundary walls?
Yes. We apply external cement render to villa facades, boundary walls and commercial buildings, ready for paint, texture or stone finishes.
Do you offer machine plastering?
Yes. For large villas, buildings and commercial projects we use plaster spraying machines. The machine mixes and sprays the plaster evenly, then our team levels and finishes it by hand. It is faster and gives a more consistent thickness than hand mixing.
Can you repair old or damaged plaster?
Yes. We remove loose or hollow plaster, treat the cause where we can see it, such as damp, and re-plaster patches so they blend with the existing wall before painting.
How is plastering priced?
Plastering is normally priced per square metre. The price depends on the plaster type, thickness, wall condition, height and access. Site visits are free and every quote is written.
Do you also paint after plastering?
Yes. We can deliver the full finish: plastering, putty, primer and paint, inside and outside, so one team is responsible for the result.
Which cities do you cover?
We work in Riyadh, Jeddah, Dammam, Khobar and other cities in Saudi Arabia, subject to scope and site.
Need walls plastered or repaired?
Send photos, drawings or your location. Our team will contact you within 24 hours to arrange a site visit and quote.
Related Services
Explore Our Other Services in Saudi Arabia
- Exterior Painting
- General Contracting
- Sandblasting & Surface Preparation
- Road Construction & Asphalt
- Welding & Steel Fabrication
- Buildings & Civil Works
- Electrical & Mechanical Works
- Waterproofing & Insulation
- Renovation & Maintenance
- Gypsum Board & Ceilings
- Tile, Marble & Stone
- Epoxy Flooring
- Carpentry Works
- Landscaping Works
- Aluminium & Glass