Sandblasting Services in Saudi Arabia, coating-ready surfaces
Anas Al Khaleej Company removes rust, mill scale, old paint and industrial buildup with controlled abrasive blasting. Our mobile team comes to your site with compressors, media and containment, and leaves a clean profile ready for primer, paint or epoxy.
A coating is only as strong as the surface beneath it
Most early coating failures start before the first coat. Rust, mill scale, grease, salts and old paint stop new coatings from bonding, and in Saudi heat and coastal humidity that failure shows up fast as blistering, peeling and under-film rust.
Abrasive blasting removes these contaminants and cuts a consistent anchor profile into the surface, so primer and paint grip mechanically instead of sitting on top.
We blast to the cleanliness grade your coating specification calls for, and we check the result before any primer goes on.
Loose rust, loose paint and mill scale removed. For light maintenance work.
Equivalent: SSPC-SP 7Most rust, scale and paint removed. Firmly adhered residue may remain.
Equivalent: SSPC-SP 6Only slight stains remain. The usual grade for industrial and protective coatings.
Equivalent: SSPC-SP 10Uniform bare-metal finish. For immersion service and high-performance linings.
Equivalent: SSPC-SP 5Sandblasting solutions for demanding assets
From fabrication yards to running industrial facilities, we scale equipment and crew to the size, condition and location of your project.
Structural steel & fabrications
Beams, frames, columns and fabricated steel blasted free of corrosion, mill scale and failed coatings before the protective system.
Tanks, pipes & vessels
Internal and external blasting of storage tanks, pipelines and process equipment ahead of lining or protective coating.
Heavy machinery & equipment
Hardened paint, concrete residue, grease and buildup removed from cranes, trucks, loaders and mechanical parts.
Concrete floor preparation
Warehouse, workshop and garage floors cleaned and profiled for epoxy, waterproofing or resurfacing.
Buildings & boundary walls
Controlled removal of graffiti, stains, dirt and old coatings from stone, brick, facades and compound walls.
Steel gates, railings & frames
Rusted gates, fences, stairs and railings stripped to sound metal and primed before repainting.
Paint & coating removal
Multi-layer paint, epoxy and failed coatings stripped without harsh chemical strippers.
Blast & prime packages
Blasting followed immediately by primer from our painting team, so exposed steel never sits unprotected.
Blasting media we use, and where
We do not use ordinary silica sand. We choose the abrasive by substrate, required profile and site conditions, and confirm it in your written scope.
| Media | Best for | Typical result | Why we use it |
|---|---|---|---|
| Garnet | Structural steel, tanks, general industrial work | Sharp, even profile | Fast cutting, low dust, no free silica |
| Steel grit | Heavy rust and scale, fabrication shops | Deep anchor profile | Aggressive and recyclable in contained areas |
| Glass bead / crushed glass | Stainless steel, aluminium, lighter coatings | Clean, smoother finish | Removes coatings without heavy profiling |
| Walnut shell | Delicate parts, machinery, soft substrates | Cleaning, no profile | Strips dirt and paint without damaging the base |
| Fine mineral media | Concrete, masonry, stone facades | Light etch | Opens the surface for coatings and sealers |
Our sandblasting process
Site assessment
We inspect the surface, coating system, access and safety needs, then agree the blast grade and scope.
Contain the area
Tarps, barriers and dust control protect people, equipment and nearby operations.
Select media & pressure
Abrasive, nozzle and pressure set for the substrate so we clean fully without damaging it.
Blast to grade
Rust, scale and coatings removed to the specified cleanliness and profile.
Inspect, clean & prime
Dust removed, surface checked, and primer applied promptly to stop flash rust.
How much does sandblasting cost in Saudi Arabia?
Sandblasting is usually priced per square metre of surface, or per item for machinery and equipment. We measure on site and give you an itemized written quote.
- Surface area and typeSteel, concrete, masonry or machinery, measured in m² or per item.
- Current conditionHeavy rust, mill scale or thick old coatings take longer to remove.
- Required blast gradeSa 3 white metal takes more time and media than Sa 2.
- Access and containmentHeight, confined spaces and live facilities need extra setup.
- Blast only or blast & primeAdding primer or a full coating system in the same visit.
Site assessments are free. Every quote lists the media, blast grade and scope in writing.
On-site sandblasting across the Kingdom
Our mobile rigs serve construction sites, warehouses, factories and industrial yards, subject to scope and access.
Riyadh
Steel structures, warehouses and machinery in the second and third industrial cities.
Jeddah
Coastal humidity speeds up corrosion. Blast-and-prime packages for port and industrial steel.
Dammam
Tanks, pipework and fabricated steel for industrial and oil-and-gas support facilities.
Jubail
Industrial plants and fabrication yards that need protective-coating preparation.
Khobar
Salt-air corrosion on gates, railings, frames and coastal structures.
Makkah & Madinah
Building facades, boundary walls and steelwork refurbishment.
Why choose Anas Al Khaleej for sandblasting
One team, blast to topcoat
Our painting and epoxy crews follow straight after blasting, so there is no gap and no flash rust.
Specification-driven
We work to the blast grade and profile in your coating datasheet or project spec.
Mobile equipment
Compressors, blast pots, media and containment brought to your site.
Safety as standard
Trained operators, proper PPE, containment and dust management on every job.
Minimal disruption
Work planned around your production, business hours and site rules.
Clear written scope
Media, grade, area and price stated in writing before we start.
Sandblasting questions we hear most
Does sandblasting damage the surface?
Not when it is done by trained operators. We adjust pressure and choose suitable media for the substrate, so we clean effectively without warping thin metal or damaging masonry.
Do I need to bring items to your workshop?
No. We bring mobile blasting rigs with compressors, media and containment to construction sites, warehouses and industrial facilities.
How soon should steel be primed after blasting?
As soon as possible, ideally in the same shift. Freshly blasted steel starts to flash rust quickly, especially in humid coastal cities, so we recommend blast-and-prime in one visit.
What is Sa 2½ and do I need it?
Sa 2½ is the ISO 8501-1 near-white blast grade. Most industrial and protective coatings require it. Your coating datasheet states the grade, and we blast to that.
Do you use real sand?
No. Silica sand creates hazardous dust. We use safer, more efficient abrasives such as garnet, steel grit, glass media and walnut shell.
Can you blast concrete floors before epoxy?
Yes. We clean and profile concrete floors so epoxy and floor coatings bond properly. Our epoxy team can apply the coating afterwards.
How long does a sandblasting job take?
It depends on area, condition and blast grade. Small gates and railings can be done in a day, while large steel structures or tanks are planned over several days. We give a timeline with the quote.
Is the site assessment free?
Yes. We inspect the surface, confirm the scope and give you an itemized written quote with no obligation.
Need steel, concrete or machinery prepared for coating?
Tell us what needs blasting. A specialist will contact you within 24 hours to arrange a site assessment and written quote.
Related Services
Explore Our Other Services in Saudi Arabia
- Exterior Painting
- General Contracting
- Road Construction & Asphalt
- Welding & Steel Fabrication
- Buildings & Civil Works
- Electrical & Mechanical Works
- Waterproofing & Insulation
- Renovation & Maintenance
- Gypsum Board & Ceilings
- Tile, Marble & Stone
- Epoxy Flooring
- Plastering Works
- Carpentry Works
- Landscaping Works
- Aluminium & Glass